In
Maintenance ••• Less Means More
< > Less Effort
••• means
••• More Productivity
< > Less
Complicated
••• means ••• More Confidence
< > Less Waste
••• means
••• More on the Bottom Line
The 1500
series
OILmiser Filter Cart gives you the power and
performance
of
a heavy weight with the agility of a feather weight.
Designed
for
the Workplace
<
> With
a low center of gravity, a 14 inch width, and under 60 Lb. the OILmiser
Filter Cart is unequaled for portability.
< > 6"
diameter by 2" wide urethane wheels on precision bearings, lets the
OFC-1500
pass safely over steel grating and floor decking.
< > The
proven Tuthill rotor & crescent pumping principle, close coupled to
a High Efficiency TEFC electric motor gives superior performance in
higher
viscosity (up to 1000 SUS) and cold weather applications .
< > The
light weight aluminum frame, the low center of gravity, and a well
positioned
lifting handle, lets you use a safer inline back and arm posture
whenever
lifting is required.
The
1500 Series
OILmiser Filter Cart < > Fully Equipped
and
Ready For Work
<
> The
standard OFC-15275-3410M is supplied with a single Non-By-pass Filter
Head.
< > One
Filter canister means more confidence and less waste when change-out is
indicated.
< > Spin-on
Filter Canisters are 3.7" Dia. by 8" long Microglass with a rating of
Beta
(x) = 75.
< > A
full flow relief valve in the pump (set to 75 psi) insures that no
unfiltered
oil can by-pass the filter.
< > A
Filter Condition Indicator, highly visible and color coded identifies
filter
change out times.
< > A
Stainless Steel Y-Strainer on the pump suction protects the pump from
larger
contaminants.
< > A
3-way stainless steel selector valve facilitates the transfer of oils
not
requiring filtration, for special applications like water removal,
without
fouling the prime filtration canister.
< > Quick
Disconnects compliant with ISO-7241-1B Interchange Standards are
supplied
with dust caps on all suction and discharge ports .
< > Series
B Minimess Oil Sampling Valves are installed before and after the
filter.
< > A
12 ft. industrial power cord (AWG 14/3 SJTOW) stores conveniently on
the
rear mounted cord carrier.
< > A
motor mounted On-Off Toggle switch with a protective rubber boot adds
safe
and simple control.
< > For
permanent installations, the handle assembly, cord carrier and wheels
can
be removed in minutes. Two slotted holes on the back plate
accommodate
mounting bolts for wall mounting.
The
1500 Series
OILmiser Filter Cart < > 4 Models to Suit
your
Needs
Part
Number
|
Description
|
Weight
|
OFC-15275-3412M |
3/4
HP 115/230 V— 5 gpm @ 1800 rpm @ 1000 SUS @ 100º F @ 100 psi |
65
Lb.
|
OFC-15150-3406M |
1/2
HP 115/230 V — 2.5 gpm @ 1800 rpm @ 1000 SUS @ 100º F @ 100 psi |
54
Lb.
|
OFC-15025-3403M |
1/4
HP 115/230 V — 1.5 gpm @ 1800 rpm @ 1000 SUS @ 100º F @ 100 psi |
51
Lb.
|
OFC-15V456-3412M |
1/2
HP 115/230 V — 1.9 gpm @ 1140 rpm @ 4000 SUS @ 100º F @ 100 psi |
74
Lb.
|
The
OILmiser
1500 series Filter Cart is shipped with one extended length filter
canister
with a Microglass filter media and a rating of Beta (x) =75.
Available
micron ratings include 12 m, 6m, and 3m. A water
absorbing
cellulose filter canister is also available with a rating of 10 micron
nominal. Filter elements are sold in case lot quantities of 6
canisters
per case.
JLM Systems Ltd.
23091 Westminster
Hwy, Richmond,
B.C., Canada V6V 1B9
Email: [email protected]
|